INFO CENTER

1）The power source has no voltage. Check the power source. 2) The setting of the brightness of screen background is not correct. Press CTRL+L to adjust the brightness.

1) Check the printhead. 2) Check the printhead whether it is activated. 3) Check whether the printer can receive the detect signal through diagnostic screen. 4) Check the settings of encoder. 5) Check the settings of photocell.

1)Nozzle clogging. Flush the nozzle. Because the inkjet printer uses quick drying ink, if the machine is not cleaned well when it stops jet, or the machine has not been used for several days, it is easy to cause nozzle clogging. Make sure that you start jet and stop jet normally. If the machine is going to stop using for a period of time, make sure the machine will be in normal operation for over 2 hours every 10 days or so. 2)Filter clogging. Please contact engineers of Lead Tech for regular maintenance. 3)The ink stream of nozzle has not been adjusted well. Adjust the nozzle under the guidance of engineers of Lead Tech.

1)The setting of Width or Product Delay in Message Parameters is wrong. Adjust Width or Product Delay. 2)Malfunction of photocell. Check the connection of photocell, and clean the inductive head of photocell. 3)The installation position of photocell has changed. Install and fix photocell all over again. 4)The setting of sensitivity of photocell is not correct. Adjust the sensitivity of photocell.

1)The charge electrode or the phase detector is dirty or wet. Flush the nozzle, the charge electrode and the phase detector. Dry the printhead. 2)The breakup of droplets is bad. Observe the position of the ink stream. If it is necessary, adjust the parameter. 3)Poor grounding. Check whether the grounding wire is in good contact. 4)The ink system is dirty or there is something wrong with the ink/top-up. Please contact engineers of Lead Tech.

According to the survey, because some inkjet printers are not frequently used, failures often appear. For example, some clients use it once every two or three weeks. Furthermore, some use it once one or two months. Actually it is not the matter of the quality of printers but the low frequency of usage. So, how to maintain an inkjet printer which is seldom used?

As an integral part of creating an attractive cij printer , high-quality raw materials selection is vital for the manufacturer. Apart from that, the raw materials...

In fact, the continuous inkjet printer manufacturer consistently pays close attention to the properties of raw materials. It's the combination of raw materials and...

Material price is an integral focus in the production market. All producers do their job to decrease the prices for raw materials. Material cost is closely linked...

The production cost of cij inkjet printer relates to a series of variables, such as technology, production quality, raw material, etc.. Higher standard production...

It varies from manufacturer to manufacturer using different technologies and working with different raw material suppliers. In order to ensure the quality of continuous...

Search "inkjet coding printer China" on the internet. Their achievement in SEO can also be a consequence of the exceptional technology. Their tech excellence might...

Mainly there are 3 kinds of production standards - national and international standards, industry. Some inkjet coder manufacturers can even establish their particular...

In recent years, the fast-growing economy has driven the rise of the inkjet coding machine and the popularity of related industry. Under this circumstance, there...

It is suggested that the purchasers could search on the Internet for the brands of coding printer . There is much information. However, such brands are always the...