How to solve the alarm of the fiber laser marking machine
As an indispensable product for modern industrial marking equipment, fiber laser marking machine is not only small in size, but also has good output beam quality and high reliability. It has a long service life of 100,000 hours. Exquisite patterns are engraved on hardware accessories, plastics and other materials, and it is the first choice for industrial production marking equipment.
The fiber laser marking machine needs to have better maintenance and correct operation methods during use. If an alarm occurs due to poor operation, we can follow the steps below method to exclude one by one.
Cause 1: The software does not work, the motherboard is loose;
Solution: turn on the computer host, remove the motherboard, and re-insert it; If the temperature in the cavity exceeds the set value, it will even damage the laser tube;
Solution: Turn on the cooling system before starting the machine. If the laser tube is damaged, replace it with a new one. ;
Failure reason three: the water temperature in the cooling system is too high or the water volume is not enough
Solution: Add deionized or distilled water to the water tank in the cooling system to reach the appropriate water level.
According to the above method, you can quickly find out the cause of the alarm of the fiber laser marking machine, and solve the fault through the corresponding method.
(This article is edited by the editor, please be sure to indicate the source:)
is a modern cij printer widely used in date printing machine industry. It also enhances the quality date coding machine value of the products.
Reach us at Leadtech Coding. We'll always try to give you the BEST deal on . If we can't, we'll at least give you some hel pful advice. Please use our experience!
Even cij printer are being made fine with advanced equipment.