Leadtech inkjet printer: The leading manufacturer in CIJ printer and Laser printing machine since 2011. 

Laser marking machine tutorial, laser marking machine operation method

by:Leadtech Coding     2022-05-05

Introduction of laser marking machine equipment:

Laser marking machine uses laser beams to mark permanent marks on the surface of various substances. The effect of marking is to expose the deep material through the evaporation of the surface material, so as to engrave exquisite patterns, trademarks and characters. The laser marking machine is mainly divided into CO2 laser marking machine, fiber laser marking machine and ultraviolet laser marking machine. , The laser marking machine is mainly used in some occasions that require finer and higher precision. Used in electronic components, integrated circuits (IC), electrical appliances, mobile communications, hardware products, tool accessories, precision instruments, glasses and clocks, jewelry, auto parts, plastic buttons, building materials, PVC pipes.

Startup steps of laser marking machine: 1. Check the power cord of the marking machine (including power cord, pedal cord, rotary table, etc.) to make it connected correctly and reliably; 2 , Remove the lens cover; 3. Turn on the air switch and turn on the main power supply; 4. Turn on the power switch of the computer monitor and computer host; 5. Turn on the red light, galvanometer, and laser in turn from left to right; After opening, it can accept the operator's command for marking operation. As shown below:

Operation steps of laser marking machine: 1. Create a new text document or QR code or open the file, and then select the file - open - select the file to be marked ( The file suffix is u200bu200b.ezd), the tooling of the workpiece to be marked is fixed directly under the galvanometer, and the workpiece to be marked is placed; 2. Aim for alignment, click the 'red light (F1)' button with the mouse, and the laser head emits The red box is shot on the marking part, and the two-dimensional worktable is adjusted to the position to be marked. After adjustment, click the 'red light' button to turn off the red light, and then fix the tooling again; 3. Focus to find the focus , place the focal sheet at the place to be marked (basically the same height), adjust the height of the laser head by shaking the handle, when the word Z printed by the laser beam on the focal sheet is clear, and when the laser is bright, the focusing is completed; parameter adjustment, including processing Number, speed, power, frequency and filling type, try engraving several times, and choose the effect you are satisfied with; 4. Click 'Marking (F2)' to start the marking work (marking multiple workpieces can be repeated several times) ). After the marking is completed, first exit the marking software EZCAD2.7.6, and turn off the laser, galvanometer, red light, and computer at one time (just the opposite of the boot sequence). Cut off the power supply, put on the protective cover of the galvanometer, and clean the work surface.

The average consumer is always looking for ways to save money while finding out solutions, is designed for killing two birds with one stone, providing a perfect solution to cij printer problems.
LEAD TECH Technology Co., Ltd. is proud to be recognized as some of the most important and influential providers for global customers.Visit us at Leadtech Coding.
LEAD TECH Technology Co., Ltd. who primarily serve our consumers need to consider offering their products in an date coding machine such as cij printer to take advantage of the growing interest from consumers in supporting expiry date printing machine.
People tend to want what they perceive they cannot have. Making Leadtech Coding seems exclusive or as if it will go out of stock if they don't act quickly often makes it more enticing to the consumer and increases the likelihood that they will buy in.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...