Leadtech inkjet printer: The leading manufacturer in CIJ printer and Laser printing machine since 2011. 

Structure of UV Laser Marking Machine Laser Marking Machine

by:Leadtech Coding     2022-03-11

The important part of the laser marking machine is the laser. The laser can be said to belong to the core part of the laser marking machine. The core part is well maintained, and you know how to deal with common problems. The frequency of failures and service life will increase.

The laser has requirements for the environment. The working environment is water-cooled. We generally have to wait for the temperature of the chiller to reach 25 degrees before turning on the laser. We recommend that customers use it in a clean room. In a workshop with excessive dust, dust may fall into the lens, reflector, and beam expander, which may affect the weak beam. Regular maintenance and cleaning should be carried out to avoid affecting normal use.

If the laser cannot be connected to power, do not rush to press the button on the laser, you should check whether the adapter is powered on, whether the equipment is grounded, and whether the wires are damaged, etc. After checking, the laser can not be connected to the power, the indicator light next to the laser button is not on, the laser does not light, and the marking software is opened to indicate that it is not connected or unavailable, and the laser marking machine has not been solved after various investigations. It is recommended that a professional be repaired.

If the temperature is too high, it is generally the laser temperature is too high. The treatment method is to check whether the ambient temperature is too high or the internal temperature of the equipment is too high, and consider ventilation. Check whether the water-cooling machine has a low flow rate or poor cooling effect. If necessary, turn off the computer, turn off the laser, turn off the key switch, and wait for professionals to arrive at the scene to investigate and solve the problem, so as to avoid damage to the laser or other components due to wrong operation. Suggestion: main power supply Do not turn off the switch, so that the UV laser can work in a dormant standby state, which can maintain the temperature of the frequency-doubling crystal, which is beneficial to the storage of the crystal and prolongs its service life.

It is difficult to eliminate the weak laser beam. We first check whether the frequency of the working parameters has changed. If it is too low, pay attention to it (the lower limit is 30KHZ), it may be damaged. Crystal, if the problem has not been solved, check whether the power parameters have changed. If there are changes in the UV laser marking machine, you need to increase the power parameters. Generally, the pulse width and current are adjusted. Whether the lens is covered by dust, the dust should be cleaned in time. According to the factory environment, regular inspection, cleaning and maintenance should be carried out. If the above methods cannot solve the weak laser beam, professional personnel are required to deal with it.

The composition is actually very simple, just like when we were new to the computer, we didn't know what accessories the computer was made of. With the home use of the computer, now we can all Buy accessories to assemble yourself.

Also, with the wide application, we have come a step closer to understanding it, and its structure is close at hand. The main accessory is the ultraviolet laser, which is used for To mark information on the product, it is not enough with lasers. Focusing, galvanometers, lenses, etc. are essential. They can focus the emitted light source to the point where the light is strong, so it needs a power supply to work normally. , In order to generate heat when working, the cooling tool IC automatic laser marking machine is indispensable. You can use a fan or a water tank. These tools seem to be enough, but they are far from enough. I don't like it, so there must be a control card. We need to edit things flexibly and conveniently. The computer has a certain development history in editing patterns and characters. It is a good choice to connect the computer to the control card for editing. The main things can be roughly marked. , Auxiliary equipment is also essential, such as red light, if not, we don't know where it will mark, currently it is not so dependent on red light, the light emitted by high power can also adjust the marking position, work The table is also necessary. Different products generally use different worktables. The work efficiency will be improved when used together, and the production quality will be more optimistic. The main components are roughly as described above, and the small accessories are not listed one by one, such as: switches, screws, fixed Lines, etc., the specific accessories need to be viewed according to customer needs, and the functions required by customers are different, and auxiliary accessories may be increased.


LEAD TECH Technology Co., Ltd. thinks that customer satisfaction is one of the most important determinants of brand loyalty. High-quality service can be the difference between a one-time buyer and a lifelong repeat customer.
No, this isn't a wonder product and it won't be likely to change your life but it will give your date printing machine a kick and bring the extraordinary to the every day. give it a shot at Leadtech Coding.
Your co-workers, investors and clients have busy schedules, and it can be hard to get everyone in the same place at the same time for cij printer. So, it is important to create a connection between company and clients.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...