What are the main methods of using the coding machine?

What are the main methods of using the coding machine? For some friends who are not familiar with the use of the coding machine, or some friends who have just met, it is inevitable that there will be some strange feelings, but they don’t know how to start. At this time, you can get a professional understanding in some ways. So, what are the main methods of using the coding machine? Next, I will tell you in detail about the methods. 1. To install the ribbon and adjust the width of the ribbon: remove the movable splint for putting and retracting the ribbon, put it into the cover, and then put on the tightening nut, and then stick the end of the ribbon on the hollow paper tube, and then Set the device, then put on the splint, and then tighten the nut. Then adjust the plastic retaining ring of the movable guide belt so that the distance between the two retaining rings is controlled within the range of the colorimetric bandwidth of 1mm.　　2. Adjustment of tape feeding resistance and typing pressure: During the printing process of the printer, the tightness of the tape also needs to be controlled accordingly to avoid too much resistance. After printing, the ribbon must have sufficient tension, and the ribbon must not be misaligned during operation. According to the requirements of the operation technology, the end face of the print head must be about 1.5mm lower than the upper end face of the material, and it will be too low. Causes excessive pressure. 3. Stroke adjustment method: loosen the screw cap on the hexagonal side rod first, and then adjust the hexagonal side rod. The ribbon feeding stroke also needs to be professionally adjusted. The distance of the ribbon feeding stroke also needs to be changed, which can be adjusted by adjusting the stroke. The position under the screw can be used to change the length of the tape and the distance between the character strings. The above is a detailed description of the main methods of using the coding machine. I hope that friends who don’t understand this aspect will have a professional understanding and professional operations to avoid unnecessary troubles. These things need to be done well. Understand accordingly.