Leadtech inkjet printer: The leading manufacturer in CIJ printer and Laser printing machine since 2011. 

What is the difference between metal RF tube co2 laser marking machine and glass tube co2 laser marking machine?

by:Leadtech Coding     2022-03-06

What is a laser marking machine, many people may not know much about it, but laser marking products can be seen everywhere in our lives. The laser marking machine can leave a permanent mark on the surface of the material, The principle is to use a high-energy laser beam to irradiate the surface of the material to expose the deep material, so as to engrave the required pattern, text, barcode, two-dimensional code and other information. There are many types of laser marking machines. Different materials require different laser marking machines. Not a single marking machine can mark any material. At present, the main classifications of popular laser marking machines are as follows: fiber laser marking machine, ultraviolet laser marking machine, co2 laser marking machine, green laser marking machine, end pump laser marking machine, UAG laser marking machine marking machine, semiconductor laser marking machine, etc. Laser marking machine is mainly used in some products that require high precision and high precision, and has a wide range of applicability: electronic appliances, hardware products, jewelry, clocks and glasses, precision instruments, medical equipment, aerospace ships, electronic components, pharmaceutical and food packaging , integrated circuits, building materials, handicrafts, etc.

There are also two types of co2 laser marking machines in laser marking machines, one is metal radio frequency tube and the other is glass tube. What is the difference between them? The following is a brief description of the laser editor. 1. The metal tubes of the co2 laser marking machine are imported and domestically produced, and the glass tubes are domestically produced. The service life of the metal tubes can reach more than 45,000 hours. Generally, it can be used for about six years. It can be recharged and used again after use up, and the glass tube is generally used for about 8,000-10,000 hours. Generally, it needs to be replaced once a year or so. It is a one-time use and cannot be reused.

2. The stability of the metal tube is stronger than that of the glass tube. The metal tube is fully sealed and uses a low voltage of 30 volts. If the glass tube is used on the cutting machine, it is generally required. Using a power supply of more than 10,000 volts, the performance is unstable, and the power supply is easy to age after working for a long time, so there is a potential safety hazard, and it has a great interference to the control system. Its normal function, and it is easy to freeze the module in winter. 3. The light spot of the co2 metal tube is 0.07mm, the light spot is fine, the precision is high, the heat effect is small, and it can be processed finely, while the light spot of the glass tube is 0.25mm, which is more than three times that of the radio frequency tube. Poor, unstable light output, large heat diffusion area, melting of cut edges, and obvious blackening.

4. The air-cooled co2 metal tube can work stably for a long time without failure. The water-cooled glass tube will produce unstable light if the continuous processing time is too long or the water temperature is not in a constant range. Or no light, continuous work has a great impact on the quality of the product.

It can be seen from the above points that the metal tube is much better than the glass tube, but the price of the metal tube is much more expensive than that of the glass tube. If the precision requirements of the processed products are not very high If it is high, there is no problem with using a glass tube. Such as: leather, fabric, acrylic, etc., so don't blindly choose equipment when purchasing equipment. It is not necessarily the most expensive one. You must first understand your own products and the properties of the required equipment. It is best to make proofing first. Laser can Free samples are provided, and customers in need can contact us. Address: No. 107, Yanyang Road, Chengyang District, City, Tel: 18663960188 17660995317 WeChat same number.

LEAD TECH Technology Co., Ltd. has various branches in different countries worldwide.
Make your date coding machine date printing machine. Invest in professional cij printer services. For more info, check out Leadtech Coding.
expiry date printing machine cij printer is characterized by various advantages, such as date coding machine, date printing machine and expiry date printing machine, which is not the case with other cij printer.
In conjunction with retraining and upskilling efforts, LEAD TECH Technology Co., Ltd.’s workers should focus on growing unique human skills that high-tech machines are unable to replicate, such as strategic and abstract thinking, complex communications, creativity and leadership competencies.
date coding machine problems are nothing new, almost every one of us have to go through them at some point of our lives and some of us never get rid of them. with the development of date printing machine technology, now provides a perfect cure for that.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...