Advantages and options of laser marking machine prices

Analyze what should be paid attention to when purchasing a laser marking machine: .

First of all, we must choose the right type. There are many styles of laser marking machines on the market. We need to know our processing materials and effects. The laser marking machines on the market are roughly divided into Two categories: dynamic CO2 laser marking machines can be used on non-metallic materials, and fiber laser marking machines can be used on metal and some non-metallic materials.

Second, it depends on the laser of the equipment. The laser is an important part of the laser marking machine, and it is also an important factor affecting its quality. At present, some manufacturers on the market are independent developed and produced.

Thirdly, it depends on the galvanometer, high-speed galvanometer, which increases the production efficiency by 30% compared with the traditional one, and completes the processing quickly and economically for the user. A good galvanometer can make the laser The speed of the marking machine is guaranteed to be efficient, and the graphics accuracy is also guaranteed. Please refer to the purchase qualification of the laser marking machine.

Fourth, depending on the operational performance and module design, a good laser drilling machine must be easy to operate, high in work efficiency, low in labor costs and stable in performance.

Fifth, look at after-sales, laser marking machine laser equipment purchase must consider after-sales, complete pre-sales services (equipment technical consultation, sample samples, equipment selection etc.), installation and commissioning (assign a technical service engineer to install on site, and debug the machine for use within 1-2 days), after-sales training (free technical training, train the buyer's operators until the operators can use the equipment normally), And later equipment maintenance (free one-year warranty, lifetime maintenance, free technical consultation and software upgrade services), a full set of pre-sale and after-sale guarantees, is the ultimate guarantee for consumers to feel at ease and comfortable.

Other instructions for laser marking machine.

Laser marking machine is composed of different accessories, a good laser accessories can bring many advantages to laser equipment, first of all, the cost of manufacturing and technology All supports are miniaturized and low-cost. Good optical fiber quality does not require strict position matching as crystal technology for the incoming light source, and can absorb photoelectricity evenly and automatically. The application of optical fiber also reduces the overall power consumption. , so the lower calorific value and the loss of UV laser marking machine and the low-energy heat will not cause damage to anything, the output energy can be divided into more energy, and increase the coordination line for multi-beam coordination Concentrated work, the requirements for the environment are also lower, the tolerance of dust and temperature can be competent in a variety of environments, and the high-quality conversion rate is also good enough for energy saving and cost use.

It is a way of cold working, its processing accuracy is high in visible light and infrared band laser, and under the same conditions, the shorter the wavelength, then The smaller the focused spot is (the shorter the wavelength, the greater the energy of a single photon), visible light and infrared band lasers rely on thermal effects to mark on the evaporated material, but ultraviolet light can directly break a chemical bond of the material, which is a molecular Disengaged from the object, the heat-affected zone of processing is relatively small, and the marking of very fine and special materials can be carried out, because this way of marking has almost no thermal effect, the index is also called laser cold processing marking.

It works fast in the production of circuit IC automatic laser marking machine, and the surface pattern can be etched on the circuit board in a few minutes, which makes it the fastest way to produce PCB samples method, more and more sample laboratories are being equipped with in-house UV laser systems.

Depending on the verification of optical instruments, the size of the ultraviolet laser beam can reach 10-20μm, so as to produce flexible circuit traces, the biggest advantage of ultraviolet rays in the production of circuit traces, Circuit traces are so tiny that they need to be seen under a microscope.

UV laser cutting is the best choice for large or small production, and for PCB disassembly, especially for flexible or rigid-flex circuits On-board is also a good option. Disassembly is the removal of a single circuit board from the panel, which can be challenging given the ever-increasing flexibility of materials.

Mechanical disassembly methods such as V-groove cutting and automatic circuit board cutting are easy to damage sensitive and thin substrates, giving electronic professional manufacturing services (EMS) companies the ability to disassemble flexible and rigid-flexible substrates. cause trouble when combining circuit boards.

Maintaining expiry date printing machine is not as easy as it may seem. You have to do plenty of important tasks. So cruel is the truth unless you've got a to help you.

If you are interested in , click Leadtech Coding to see some items with features that you will be amazed at.

Overwhelming customers with too much information or the slew of benefits cij printer provides–even if they're all valid–is a surefire way to lose their attention.

The date coding machine cij printer is an all-servo system capable of storing hundreds of date printing machine process parameters to provide custom expiry date printing machine profiles for each date coding machine type and date printing machine configuration.