Common faults of inkjet printers: font defects

With the increasing importance of logos, the utilization rate of cij printers is also getting higher and higher. Almost every packaging company has an cij printer, or large-character inkjet printer, in the factory.

Either a small character inkjet printer or a high definition inkjet printer, do you also feel that the inkjet printer suddenly fails every time you are in production is a headache? , Don’t worry,

The editor will teach you how to solve it. Today, the editor will popularize the causes and solutions of the fault that the inkjet printer has broken fonts.

When the printer is printing, the font is incomplete or the printing is not clear. This may be It is caused by the following reasons:

1. The position of the ink line in the recycler is inappropriate

2. High pressure Ink accumulation on the plate or recycler

3. The distance between the high voltage plate and the zero plate is unreasonable

4. The information is not edited correctly

5. The parameter settings in the printing settings are unreasonable, such as height, information flipping, etc.

6. The nozzle is slightly clogged or the drive value is set to overdrive.

7. It is caused by the offset of the group point when editing the information.

The solution is to investigate and repair one by one according to the reasons. First, check whether the ink line position is correct. The ink line position should generally be in the middle of the recycler port, and the distance between the top and bottom is the distance.

One-third of the upper edge of the reclaimer port; if there is no problem with the ink line position, clean the high-pressure plate or around the reclaimer and wipe dry to prevent accumulation between the high-pressure plate and the zero-level plate

Ink, if the upper half of the font is incomplete, it may be that the distance between the high-voltage board and the zero-pole board is too far due to incorrect editing of the information. Adjust it to 3.2cm; there is another possibility.

The pressure is not enough, set at 40psi, sometimes the pressure gauge value is not accurate, although the displayed value is 40, but the actual value is not 40, if this kind of problem occurs, it is the pressure display head

If it is broken, replace it; if the inkjet printer still has the fault of incomplete font after the above method is tested, it may be that the program of the cij printer is damaged.

Change the program.

Through the introduction of the editor, I believe that everyone will know how to check and how to solve the problem of the inkjet printer when the font is incomplete. The knowledge of the inkjet printer is still More

Now, everyone must read more and learn more.

Most people who see a in operation for the first time are amazed at how well the expiry date printing machine is managed.

The best way to confront your date printing machine problem is to search for a high quality offered by LEAD TECH Technology Co., Ltd. at Leadtech Coding. Take a look!

But we do think that reckoning with supply chains of cij printer is a really important step. Even super simple switches in material, or sourcing, or shipping, or worker benefits seems like good place to start.

cij printer are raising the stakes of social marketing, but they also ease the sales process by providing ways for date coding machine to effectively interact with customers.