Common troubleshooting tips for laser marking machines

　　①No water flow: check whether the pump is damaged or not powered;

　　②Water flow: check whether the water inlet and outlet are reversed or the water pipe is broken;

3. Can burst, can self-check, send data (data) does not emit light

　　Second, reset is not normal

　　1. Check whether the sensor is dirty, poor contact (loose wiring) or Damaged;

　　2, inspect the flexible conduction belt data (data) line for poor contact (loose wiring) or damage;

　　3, inspect the ground wire (other name: lightning protection wire) contact Whether it is reliable or whether the high-voltage line is damaged;

　　4, the motor line is in poor contact (the line is loose).

The laser marking machine uses a laser beam to make permanent marks on the surface of various materials.

Laser marking machines can be divided into CO2 laser marking machines, semiconductor laser marking machines, YAG laser marking machines, and fiber laser marking machines according to different lasers.

The computer control system is the center of control and command of the entire laser marking machine, as well as the carrier of software installation.

The laser marking machine should be used as far as possible in a dust-free, 10℃-35℃ environment, and keep the optics dry and dust-free.

Laser marking machine is mainly used in some occasions requiring finer and higher precision.

The marking machine is a permanent mark that cannot be erased. It is vaporized directly on the surface of the object by a laser and can be distinguished by the naked eye without any auxiliary tools, which is convenient for consumers to recognize.

Laser coding machine mainly engraves the trajectory of the character to be marked, while the dot-matrix laser machine engraves some important trajectory points of the character to be marked.

Therefore, under the same energy situation, the new dot matrix laser coding machine prints faster.

Laser coding equipment can be divided into two types: scribing type and dot matrix type according to the different marking forms.

At present, most of the laser coding equipment appearing in the market are of scribing type, while the new type of laser coding equipment adopts a new type of dot matrix technology-dot matrix retention technology.

　　3. Missing cut

　　1, the initialization is not correct, the data has been sent (data);

　　2, the operation control sequence is reversed;< /p>

　　3, static electricity (a kind of static charge) interference;

LEAD TECH Technology Co., Ltd. is considered as one of the leading supplier of cij printer products in China.

To reduce your production costs, get your and date printing machine from LEAD TECH Technology Co., Ltd.,you will get high quality warranty at favorable price in return. Visit Leadtech Coding.

Establish a unique brand as Leadtech Coding that cuts through the clutter, and you'll get you the capital you need to get moving.

The only cardinal rule with adding animation is to keep high-quality on cij printer.

LEAD TECH Technology Co., Ltd. always focus on the situation of global market and understands the importance factors of manufacturing cij printer.