Daily maintenance and use precautions of UV laser marking machine

Ultraviolet laser marking machine is a widely used marking equipment at present. Because of its small spot and good beam quality, and it can be applied to mark on multiple materials, it is regarded as a marking machine together with fiber laser marking machine. The leader in the label machine industry. Since ultraviolet light is cold light and needs water cooling, it is especially important for the use environment. Here is an introduction to the daily maintenance and use of the ultraviolet laser marking machine:

1. The UV cooling water must be filtered pure water (barrelled pure water), and the water tank must be cleaned once a month.

2. The ultraviolet laser marking equipment has strict requirements for the use environment, and the indoor temperature is controlled in the range of 20-30 degrees.

3. The cooling water tank of the UV laser marking equipment must use a high-precision or constant temperature water tank. The fluctuation or instability of the water temperature will directly affect the instability of the output power of the UV laser marking machine

4. Due to the low power of the UV laser marking machine, it is not recommended that customers use it to mark metal hardware and other products that require high power.

5. When using UV laser marking equipment, you should pay attention to whether the connection of the power supply is normal and will it work? cause a short circuit or ground during the process.

6. In the process of using the UV laser marking equipment, be careful not to cause damage to the power supply and cables, resulting in electric shock or short circuit, or even fire.

7. During the operation, try to use only one hand to do the homework. In order to prevent the current in work from forming a loop through the human body, causing certain damage.

8. When completing the work, when closing the laser marking machine equipment, it should be closed one by one to avoid equipment failure caused by improper operation.

5. The wires and cables used must be designated wires to avoid unnecessary dangers caused by mismatched wires.

6. When the equipment is connected to the protection line, the third-party grounding protection should be carried out, and the quality of the grounding should be ensured, otherwise it will easily cause leakage or electric shock to the staff. .

(This article is edited by the editor, please be sure to indicate the source:)

One increasingly popular managerial tactic to improve problem-solving performance of cij printer is to increase the connectedness, or what academics call clustering, of the organization

LEAD TECH Technology Co., Ltd.’s sole aim is to provide exquisite and unheard of features to the concept of producing technology.

LEAD TECH Technology Co., Ltd. has developed its range of products around its own market research, which discovers customers' precise needs.