How to maintain the inkjet printer when it is hot in summer?

1. Keep away from fire sources: The inks, solvents and cleaning agents used by the printer are all flammable substances, and careless placement and use may lead to fire accidents. The inkjet printer consumables should be placed in a cool and dry place. The ink and solvent must not be stacked together. The opened consumables should be sealed in time to prevent dumping and gas leakage. The warehouse where the consumables are placed should also pay attention to air circulation, and open flames are strictly prohibited. The cij printer production site must pay attention to ventilation and fire prevention. Solvents and inks contain volatile components. The temperature factor will accelerate this phenomenon. The density of these gases will accelerate the danger of fire. 2. The casing of the inkjet printer needs to be grounded: According to the working principle of the inkjet printer, the grounding of the cij printer casing can lead to the charge of the casing and avoid the influence of the electric field on the ink. Affects the normal operation of the ink line and the printer.

The equipment is properly grounded to avoid the risk of an operator touching the equipment and being shocked by static electricity.

3. Wear protective equipment: Operators should wear protective equipment, such as eye protection, gloves and protective masks, etc. If solvent, cleaning agent or ink accidentally splashes into the eyes, they need to immediately rinse with water for at least ten minutes, and seek medical attention as appropriate. Good necessary protection. Clean the air filter every month to keep the filter clean and smooth, which can help dissipate heat inside the chassis and effectively reduce the consumption of diluent. Fourth, long-term shutdown maintenance: When protecting and maintaining the printer, the printer in the printing state should be shut down normally by pressing F1, and then remove the nozzle cover, check the nozzle, recovery pipe, high pressure plate, Check whether there is ink around the negative plate, etc. If there is ink, you need to use a cleaning agent to clean the surrounding ink to keep the nozzle clean. If the printer is not used for a short period of time (within one month), after the ink line is stopped, find the nozzle cleaning menu in the system, and store it in a cool place after 3 nozzle cleaning. If it is more than one month, please contact our engineer, go to the door to drain the ink, and clean the machine before placing it, so as not to run the ink circuit system for a long time and cause the ink circuit system of the equipment to be blocked, and also prepare for the next use of the equipment to avoid equipment failure. Can not be used normally, or cause unnecessary maintenance costs!

This is an global standard which acts as a form of promise that LEAD TECH Technology Co., Ltd. manufatures according to the finest quality standards.

A detailed plan must be developed if we hope to reach your profitability goal. Once we have a certain figure in mind, LEAD TECH Technology Co., Ltd. and our staff need to determine all the steps necessary to reach that goal and act on them.

LEAD TECH Technology Co., Ltd. has extented its range of manufacturing scale, which satisfys customers' needs.