Interpretation of various parameters of fiber laser marking machine

Fiber laser marking machine is a mainstream laser marking machine at present. Its service life can reach 100,000 hours. It is cooled by air cooling. It is mainly used for marking and engraving of metal materials. For better operation and use of fiber laser marking machine, we need to understand some main parameters of fiber laser marking machine.

1. Laser power supply current - control the laser power value output by the laser. The higher the current value, the higher the laser power.

2. Frequency - control the peak power of the laser and the number of laser pulses per unit time. The larger the frequency value, the smaller the peak power and the more laser pulses per unit time.

3. Graphic filling spacing - control the solid degree of marking graphics. The smaller the graphic spacing, the denser the filling, and the closer the graphic is to a solid. Of course, the more lines there are, the longer the processing time will be. vice versa.

4. Fill angle - control the direction of the fill line and determine the texture in the graphic. Common fill angles are: 0 or 180 degrees; 90 degrees; 45 degrees; 135 degrees.

5. Marking speed of laser marking machine - control the speed of laser marking. It is the processing speed of the laser marking machine when marking - the speed of the laser output when marking the line.

6. Idle speed—the speed of the laser when scanning and processing the frame of the graphics; the speed of the laser from the initial point to the processing starting point. The parameters that do not need to be adjusted frequently are: the following effects mainly determine the line effect of the marking graphics, such as line sealing, filling and the coincidence of the wheel hub, etc., generally default.

7. Turn-on delay - the delay to the laser at the moment when the laser outputs the laser.

8. Light-off delay - the delay to the laser at the moment when the laser turns off the laser.

9. Corner delay - when the included angle is greater than 135 degrees, the delay of the laser at the corner.

10. Jump delay - the delay between turning off the laser and turning it on.

In summary, no matter how the control interface changes, the basic control parameters of the marking software of fiber laser marking machine are the same. Because different software algorithms will be different, when the same control menu is filled with the same parameters, the effect will be slightly different.

(This article is edited by the editor, please be sure to indicate the source:)

In an age when cij printer is increasingly important, the researchers believe manufacturers should pay close attention to their results.

If you follow these straightforward steps you can keep your date coding machine date printing machine. I think this article will help you make a wise decision on choosing the right .

cij printer has obtained many affirmation in the market. Undoubtedlly, our customers are totally satisfied with our products.

LEAD TECH Technology Co., Ltd. emphasizes our commitment to quality in our laboratory and R&D services.

With so many suggestions and tips on diferent solutions to expiry date printing machine issues, it is truly important to know how to find the most appropriate cij printer at economical price.