Introduction to the maintenance and disassembly steps of the galvanometer of the laser coding machine

After using the laser marking machine for a period of time, there will be problems such as no light, or the light output is weak and the depth is shallow. Generally, these problems are usually caused by the problem of the laser galvanometer, and we need to remove it and send it back to the manufacturer for maintenance.

Steps for disassembling the galvanometer:

1. Before disassembling the galvanometer, it is necessary to confirm that the equipment is completely powered off. Then go to the next step.

2. The removed galvanometer needs to be covered with a protective cover to prevent scratches, and do not touch other lenses during operation.

3. Use the Allen wrench to unscrew the marking head, pay attention that the removed casing is connected to the drive board, do not pull it hard.

4. Remove the power supply cable connected to the power supply and the connection cable of the motor drive board.

5. Pack the removed y motor x motor and galvanometer and send it to the manufacturer.

Galvanometer installation steps:

1. Install the Y motor and the X motor, pay attention to the installation of the two motors at any angle. The situations do not interfere with each other.

2. Install the motor driver board.

3. Connect all power cables.

4. Arrange the wiring harness, tie it with a cable tie, and then cover the protective cover.

5. Turn on the power and test to check whether it is normal after booting.

The above is the disassembly and assembly steps of the galvanometer of the laser marking machine. I hope it will help you. When the laser marking machine fails, if you are not sure, don't do it yourself. For disassembly and maintenance, you should contact the manufacturer for after-sales solutions immediately, so as to avoid more serious damage caused by improper operation.

LEAD TECH Technology Co., Ltd.'s products, whether interim or permanent, comply fully with all appropriate producing regulations.

Exceed customers' expectations in the procedures of manufacturing cij printer.

The rising expiry date printing machine consciousness observed worldwide are expected to be key factors driving the demand for date coding machine cij printer.

The best way to determine the ideal strategy of cij printer is to continually test and refine your selling and marketing tactics.

In business, cij printer means cultivating brand loyalty; once someone is working with a product or using a service, they are more likely to commit to paying for Leadtech Coding again.