Laser marking machine marking photo tutorial method (with picture)

Fiber laser marking machine and CO2 laser marking machine both use fiber laser to output laser, and then realize the marking function through high-speed scanning galvanometer system. The laser marking machine has high photoelectric conversion rate, long service life, easy maintenance, adopts air-cooled cooling, small size, good output beam quality, high reliability, and fast marking speed, which greatly improves the processing efficiency. High-precision three-dimensional positioning technology, high-speed focusing and scanning system, laser beam fundamental mode, short pulse, high peak power, high repetition frequency, bring satisfactory marking effect to customers.

Scope of application of fiber laser marking machine:

Widely used in metal materials and some non-metal materials, especially suitable for some requirements of finer and higher precision It is widely used in electronic separation components, integrated circuit (IC) electrical circuits, mobile communications, precision instruments, personalized gifts customization, glasses and clocks, computer keyboards, jewelry, hardware products, kitchenware , tool accessories, auto parts, plastic buttons, plumbing accessories, PVC pipes, medical equipment, packaging bottles, sanitary ware and many other fields of graphics and text laser marking, as well as mass production line operations. Having said so much about fiber laser marking machines, do you really know how to operate laser marking machines? Today, the editor of Laser Technology Co., Ltd. will answer the tutorial method for laser marking machine to make pictures:

Let's go directly to the topic, first prepare a high-definition photo (the pixel of the low photo is too low to be printed) Good results), imported into the laser marking machine software, and then we set the relevant parameters. First of all, fix the DPI value, which is simply the pixel point. The higher the value set in it, the better the effect and the slower the relative time. The commonly used value here is around 300-600. Of course, you have to set a higher value. It is also possible, here you can make relevant parameters.

Then we need to set the relevant photo parameters. In most cases, we need to set the inversion and dot mode for the photo (there will also be a case where the inversion is not selected. Under normal circumstances, it is necessary to set the inversion), enter the extension after setting, check the brightening process, the contrast adjustment is to control the ideal effect of the photo, the white area is not marked, and the black area is marked.

The following is the scan mode. Here I usually use the dot mode and I set it to 10. Bidirectional scanning is generally not recommended. It is too slow to scan left and right, and there is no need to adjust the point power. The speed on the right side of Z is set to about 2000, and the power is about 40 (the power is determined according to the material of the product. The power of 40 is set here for reference. If the mobile phone case takes pictures, the power can be set to a higher value), the frequency is about 30, and the frequency size is set. The problem is, the greater the frequency , the more dense the dots come out of the laser. The picture below is a rough picture of the parameters, but there is one, each photo needs to adjust the contrast. The CO2 laser marking machine is a principle, which will not be introduced one by one here, but a photo of wood laser marking is provided.

To that end, LEAD TECH Technology Co., Ltd. has successfully built a solid foundation and infrastructure for cij printer manufacturing.

We would appreciate your immediate attention to cij printer.

Once we have a good idea of how cij printer can satisfy customer’s needs, consider whether we should create a skill for their demands.