Maintenance and cleaning skills of laser marking machine

　　 Laser marking machine is the energy released when the laser beam is irradiated to the surface of the workpiece to melt and evaporate the workpiece to achieve segmentation and engraving (the general term for the three creative methods of engraving, engraving and plastic) The purpose is to have the characteristics of high precision, fast segmentation, not limited to cutting patterns, automatic typesetting, saving material (Material), smooth cutting, and low processing cost. It will gradually improve or replace the traditional cutting process equipment.

　　Laser marking machine uses a laser beam to make permanent marks on the surface of various materials.

Laser marking machines can be divided into CO2 laser marking machines, semiconductor laser marking machines, YAG laser marking machines, and fiber laser marking machines according to different lasers.

The computer control system is the center of control and command of the entire laser marking machine, as well as the carrier of software installation.

But in daily work, the laser marking machine must be maintained to make it play a better performance advantage.

　　The replacement of water and the cleaning of the water tank (components: high water tank, storage tank, low water tank)

　　 Recommendation: Clean every week Water tank (components: high water tank, water storage tank, low water tank) and replace the circulating water once

　　Attention: Make sure that the laser tube is filled with circulating water before the machine works.

The coding machine breaks through the standardization and singularity of traditional inkjet coding technology, creating a brand-new coding method, highlighting product characteristics and brand differences, and improving products in the increasingly fierce market China’s competitive ability, and at the same time provide a powerful tool for shortening the product upgrade cycle and flexible production.

The water quality and water temperature of the circulating water of the laser marking machine directly influence the use time of the laser tube. It is recommended to use pure water and control the water temperature below 35℃.

The laser marking machine should be used as far as possible in a dust-free, 10℃-35℃ environment, and keep the optics dry and dust-free.

Laser marking machine is mainly used in some occasions requiring finer and higher precision.

If the temperature exceeds 35℃, you need to replace the circulating water, or add ice cubes to the water to reduce the water temperature. (It is recommended that the user choose (xuanze) cooler, or use two water tanks (components: high water tank, storage tank, low water tank) ).

　　Clean the water tank (components: high water tank, water storage tank, low water tank): first turn off the power, unplug the water inlet pipe, let the water in the laser tube automatically flow into the water tank (component: high In the water tank, water storage tank, low water tank), open the water tank, take out the water pump, and remove the dirt on the water pump.

The laser marking machine uses a laser beam to make permanent marks on the surface of various materials.

Laser marking machines can be divided into CO2 laser marking machines, semiconductor laser marking machines, YAG laser marking machines, and fiber laser marking machines according to different lasers.

The computer control system is the center of control and command of the entire laser marking machine, as well as the carrier of software installation.

The laser coding machine mainly engraves the trajectory of the character to be marked, while the dot matrix laser machine engraves some important trajectory points of the character to be marked.

Therefore, under the same energy situation, the new dot matrix laser coding machine prints faster.

Clean the water tank, replace the circulating water, restore the water pump back to the water tank, insert the water pipe connecting the pump into the water inlet, and arrange the connectors.

Power on the water pump alone and run for 2-3 minutes (make the laser tube full of circulating water).

There are a wide variety of which are scientifically tested to have positive effects on the ability to expiry date printing machine. date coding machine cij printer is one of them.

We would appreciate your immediate attention to cij printer.

In terms of cij printer, why is it different than other production? How does it fit a true need or desire for your requires? Is it simple to use? Make life easier?

The only cardinal rule with adding animation is to keep high-quality on cij printer.