LeadTech-printer-toonaangevende fabrikant in de codering & Markering van de industrie sinds 2011.
Etch, Don't Print: Permanent Laser Codes on Glass
Glass Container Coding & Marking
Substrates: Clear Glass · Dark Glass (Amber / Green) · Pharmaceutical Glass (Vials / Syringes)
√ Rechnology: CO₂ Laser (Permanent Etching) · Continuous Inkjet (CIJ) (High-Speed Beverage Lines, Fast-Drying Ink) · UV Laser (Fine High-Contrast Marking for Pharmaceutical / Cosmetic Applications)
√ Recommended LT Model: LT60C CO₂ Laser · LT900 (CIJ) · UV Series (5 W / 10 W)
√ The One Constraint: Glass is smooth and non-absorbent — standard ink cannot key in and beads off. Use a fast-drying specialized ink, or laser (CO₂ etches glass; fiber does not).
Glass containers are used across beer, wine, beverage, perfume, pharmaceutical, food, and cosmetics. Because glass is smooth and non-absorbent, coding relies on fast-drying inks or laser to achieve reliable adhesion and permanence. Drivers are date/batch compliance, beverage traceability, and serialization on pharmaceutical glass. Three physical realities govern selection: condensation on cold-fill and chilled bottles defeats ink; dark amber and green glass cut contrast; and returnable bottles sometimes need washable ink.
| Substrate | Key Property | Coding Implication |
| Clear Glass | Smooth, non-absorbent | Needs fast-drying specialized ink for CIJ, or laser; standard ink beads off |
| Dark Glass (Amber / Green) | Low-contrast surface | Requires higher-contrast ink than clear glass, or laser etch |
| Pharmaceutical Glass (Vials / Syringes) | High-precision traceability | An increasing number of applications are adopting permanent laser-marked DataMatrix codes. |
Coding Challenges
- Glass is non-absorbent, smooth, and non-porous → standard ink cannot key into the surface → the code beads, smears, or wipes off. Fast-drying specialized ink or laser is required.
- A cold-fill/chilled bottle → a condensation film forms on the surface → ink fails to adhere and reads fail. Use a penetrating CIJ ink, or CO₂ laser, which surface moisture does not affect.
- Amber/green dark glass → too little tonal contrast between ink and substrate → codes become hard to read or scan. Use a higher-contrast ink, or a laser etch that frosts the surface.
- Returnable/refillable bottles → a permanent mark conflicts with re-use → old codes cannot be removed for refilling. Use washable/removable ink where returnability is required.
| Technology | Fit | Why / Why Not |
| CO₂ Laser | ★ Recommended | 10.6 μm laser etches a permanent, high-contrast frosted mark on glass; no ink, no consumable cost |
| UV Laser | ★ Recommended(Pharmaceutical / Cosmetic Applications) | Fine, high-contrast cold marking for pharmaceutical DataMatrix/serial and premium cosmetic glass |
| Continuous Inkjet (CIJ) | ○ Alternative(High-Speed Beverage Lines) | Fast date/lot on high-speed beer/wine/beverage lines with fast-drying ink; choose for variable data |
| Fiber Laser | - Not recommended | Glass poorly absorbs the 1064 nm fiber wavelength; the laser that etches glass is CO₂ at 10.6 μm |
| PIJ / TTO | - Not recommended | Built for porous board and flexible film, not smooth rigid glass |
Split by purpose. For permanence and abrasion resistance, use CO₂ laser — it etches the mark into the glass, with no ink to shed. Pharmaceutical vials and premium cosmetic glass take UV laser for fine, high-contrast codes. High-speed beer/wine/beverage lines needing variable data use CIJ with a fast-drying specialized ink. Do not use fiber laser on glass — the wavelength is poorly absorbed; PIJ/TTO do not suit smooth rigid glass either.
Typical Code Content
Applications
Recommended LT Solution
FAQ
