Precautions for the operation of fiber laser coding machine

Nowadays, a large number of machines have been put into our production. For machines, it is dangerous. If you want to avoid some dangers, you need to do some practical operation precautions. We Do not operate the machine blindly, but should be familiar with some specific operating procedures before proceeding, so that some troubles can be avoided. Next, I will tell you in detail: the precautions when operating the fiber laser coding machine, I hope you will read it carefully and take action.　　 1. When using a fiber laser coding machine, the power supply or some other equipment we use must be grounded so that it can be powered on. It is strictly prohibited to place any objects with total reflection or diffuse reflection that are not related to the equipment in the equipment, so as to prevent the laser from being reflected on the human body or flammable objects. 2. The environment where our equipment is located should be kept dry, free of pollution, vibration, strong electricity, strong magnetism, etc., and need to stay away from electrical equipment sensitive to electromagnetic interference. These must be paid attention to, which can be effective To avoid interference. 3. Our laser should be an air-cooled laser, so the temperature of the working ring should be 5-40 degrees Celsius, and the working environment humidity should be 5-95%; and we are strictly prohibited to bend the optical fiber. When some abnormal phenomena occur, first turn off the laser power and vibration Mirror power supply, check again, and wait for safety before proceeding to work. The precautions for the operation of the fiber laser coding machine are described in detail here. I hope that you need to be aware of dangers during the actual operation. Only by doing a good job carefully will it be conducive to good actual operation. Some troubles can be avoided.