loading

Leading Manufacturer in the Coding & Marking Industry since 2011.

The correct way to clean and maintain S60 inkjet printer

If the printer is stopped for a long time without ink discharge, it should be turned on once a week (ink supply), and cycle for more than 2 hours each time. 1. Check and clean the print head. The machine has been running for a long time. If the high-pressure board of the print head or other places has ink or other burrs, the machine may not be able to type properly. At this time, the nozzle is routinely cleaned to remove burrs, etc., and the machine will maintain a good operating condition. Therefore, the nozzle must be cleaned after daily use. After washing, use a non-woven cloth to dry or dry directly. Be careful not to use a lint-free paper towel or cloth to dry. 1. Clean the main unit, casing, fan filter The main unit and casing can be wiped with anhydrous alcohol to remove ink and stains on them. Remove the fan filter and wash it with clean water, dry it, and put it back in place. 2. Replace the ink filter. Replace the main filter: clean the spare filter with solvent, unscrew the filter connector, and connect the new filter in the original position. The outlet of the pump is connected to the inlet of the main filter. (The inlet is on the edge of the filter) Replace the small filter: clean the spare filter with solvent, unscrew the filter connector, and connect the new filter in place. 3. Replace the ink. The ink cycle time period is 300 hours. If the printing speed is fast and new ink is constantly being replenished into the machine, the ink can be used continuously. If the printing speed is slow, and there is no new ink replenishing the machine after 150 hours of ink circulation, the old ink should be discharged after 300 hours and replaced with new ink. The way to replace the new ink: discharge the ink from the ink outlet at the bottom of the ink tank. 2. Long-term downtime for maintenance If you have been down for a long time for more than half a year, all ink should be discharged, and the ink should be replaced with solvent to run (manually test the pump switch, ink supply valve, and recovery valve during factory commissioning) until the pipeline is cleaned.

GET IN TOUCH WITH Us
recommended articles
Application News INFO CENTER
Introduction
Laser marking has emerged as a widely popular method for ensuring precise and permanent markings on various materials.
About CO2 Laser Marking Machine
CO2 laser marking machines are a popular choice for high-quality and permanent marking on various materials.
Introduction
Laser marking has become an indispensable part of various industries worldwide, revolutionizing the way manufacturers, designers, and craftsmen mark products and materials.
Introduction
CO2 laser marking machines have revolutionized the world of industrial manufacturing with their precision and versatility.
Overview of CO2 Laser Marking Machine
Laser marking technology has revolutionized the manufacturing industry, offering efficient and precise marking solutions for a wide range of materials.
Overview of CO2 Laser Marking Machine
CO2 laser marking machines have gained immense popularity in various industries due to their high precision and versatility.
Introduction
Laser marking is a popular technique used in various industries to create permanent, high-quality marks on a wide range of materials.
no data

Coding Tomorrow

Contact Us
Tel : (+86)-0756 7255629
Office Add : Floor 3/4, Building 1, No. 728, Jinhu Road, Sanzao Town, Jinwan District, Zhuhai City
Copyright © 2024 LEAD TECH (ZHUHAI) ELECTRONIC CO.,LTD - www.leadtech.ltd | Sitemap
Customer service
detect