The method of adjusting the marking depth of optical fiber marking machine

More and more industries are applying to optical fiber marking machine. The optical fiber marking machine adopts high-quality fiber laser. The marking effect is perfect and the service life is long. standard product. However, in daily use, sometimes it is necessary to adjust the marking depth. How to do it? It will be introduced in detail below.

1. Change the field lens of the optical fiber marking machine into a small-scale field lens. After changing, the marking depth will be deeper. The standard machine can be equipped with a field lens of 110, which becomes a field lens of 50, and its total laser energy and lettering depth will be about twice as high as before;

2. Increase the power of the optical fiber marking machine, which is the most direct adjustment method;

3. The marking speed of the optical fiber marking machine is slowed down. Under the same power and other parameters, just modify the marking speed, and the marking depth will of course be deeper;

4. If the laser mode of the optical fiber marking machine is better, the marking depth will also be improved to a certain extent, such as adding small holes, increasing the cooling accuracy, and adjusting the laser mode to emit light, so that the laser is the largest and the most round. , the brightest;

5. Replacing the imported field lens can also make the marking depth deeper.

6. Replace the laser with a laser with a higher success rate, and directly improve the lettering depth of the laser coder;

7. Replace with better laser marking accessories, such as imported Q switches, and the marking depth will be better.

The above is the summary of the adjustment method of the marking depth of the optical fiber marking machine. If you have better suggestions, welcome to add.

(This article is edited by the editor, please be sure to indicate the source:)