The specific operation method of UV laser marking machine marking

Ultraviolet laser marking machine is a widely used equipment at present. Because of its good beam quality, small focusing spot and extremely small heat-affected area, ultraviolet laser marking machine is applied to some high-end cosmetics and pharmaceutical industries. Today, the editor of Harmony Tianyu will share with you the specific operation method of UV laser marking machine marking.

1. Open the marking software

2. Select marking File→Open→Select the file to be marked (or create and edit the graphic to be marked);

3. Alignment: click the 'red light' below the mouse, the laser The head emits a red box and shoots it on the marking part, translate the workpiece to make the box fall on the part to be marked, and then click to stop the 'red light' after adjustment, and then fix the tooling. (Note: the alignment should be done quickly, and the red light should not be used for too long, so as not to shorten the service life of the light-emitting head.)

4. Focusing: place the workpiece template on the Mark the place, then check the continuous marking, click 'continuous processing' with the mouse, then click 'marking ime is basically the focal length. (Note: 'Continuous Processing' is only used when adjusting the focus. After adjusting the focus, please remember to turn off 'Continuous Processing' before operating.)

PS: Manual focusing is used, which is slow and inefficient, and the focusing accuracy cannot be guaranteed, so that many waste products are produced; an automatic focusing system newly developed by Harmony, this system can be configured in any laser marking machine. , only need to install the visual positioning system on the original laser marking machine, through the visual positioning system to achieve automatic focus marking, even if there is a slight difference in the thickness of the workpiece, it can also achieve automatic focus.

5. After the UV laser marking machine has finished the trial engraving, you can press the 'marking' button to carry out the marking work. (To mark multiple workpieces, just repeat this step)

The above are the specific steps for marking the marked parts for the first time, save the graphics and marking parameters The file is created, and the height of the laser head and the marking surface is measured. In the next production, the file can be called up from the computer and the height can be directly matched, and then the marking can be done.

(This article is edited by the editor, please be sure to indicate the source:)

The manufacture marketing game of cij printer is changing with each innovation, and businesses of all products need to be ready to pounce.

The best way to confront your expiry date printing machine problem is to search for a high quality offered by LEAD TECH Technology Co., Ltd. at Leadtech Coding. Take a look!

The success of cij printer of campaigns largely rides on how you market your company to the crowd.