Why do inkjet printers need regular maintenance and use points

1. Why do you need regular maintenance?

After the ink jet printer is turned on, the ink will circulate in the pipeline of the whole machine. After using the machine for a period of time, the ink will remain in the important spare parts such as filters, pipelines, joints, etc. . Over time, after the ink gradually solidifies, these spare parts will be blocked, which will affect the normal Leadtech Coding.

Therefore, regular maintenance is very important. On the one hand, it is to remove the ink residue inside the printer after using it for a period of time. On the other hand, it is also to avoid possible risks in advance and avoid unnecessary losses caused by blockage and failure during normal use. Moreover, the maintenance time of the cij printer is very short, it will not take up a lot of working time of customers, and ensure the production efficiency of customers.

2. What are the main factors that lead to shorter/frequent maintenance intervals?

1. Abnormal shutdown (directly unplug the power supply): In the case of not executing the normal power on and off, the printer fails to perform the automatic cleaning function, which is easy to cause the blockage of the pipeline/printer, which will accumulate for a long time. Seriously affect the stability and service life of the printer.

2. Use third-party alternative consumables: The ingredients used in third-party alternative consumables and original consumables are not the same. Alternative consumables save the cost of filtration during production, resulting in clogging of nozzles, filters and venturis. And the risk of deflecting the jet stream, resulting in poor print quality, printer malfunction, and more.

3. The risk of using third-party alternative consumables

First of all, the source of alternative consumables cannot be traced, their performance cannot be guaranteed, the compatibility is poor, and the probability of printer failure increases by 35% above.

Secondly, the manufacturer of alternative consumables does not comply with the health, safety and environment (HSE) regulations, and has not been tested by the quality inspection agency. estimated damage.

In addition, the printing quality of the substitute consumables is poor, which reduces the value of the product and damages the professionalism of your corporate brand image.

4. What habits can be extended maintenance in daily use?

1. Normal switch operation: because every time the printer is switched on and off, it will extract solvent from the inside of the machine to clean all the pipelines, which can effectively reduce the risk of failure. Three-month no-clean function.

2. Daily cleaning work: Especially in the dusty working environment, it is particularly important to maintain daily cleaning work. Regularly clean filters, nozzles, nozzles, etc. to avoid clogging and extend maintenance intervals.

1. Most of the inks of the cij printers we use are very volatile, so we must ensure that we have good ventilation equipment, which can ensure the freshness of our indoor air .

2. If you accidentally drop into your eyes, please rinse with plenty of water for a quarter of an hour. If you feel bad after cleaning, we need to seek medical advice urgently. This is also for us. is also very important.

3. It is also very important for the insurance of the cij printer. If it burns out, please be sure to replace some fuses of the same specification, so it is best to contact the supplier so that the supplier can carry out specific repairs.

4. In some cable factories and other enterprises with large electrical equipment, they should prepare UPS uninterruptible power supply, which is mainly to prevent the instability of the printer and the damage to the power supply.

5. The cij printer and other equipment are also different, so we also need to understand this. Its principle mainly depends on the deflection of static electricity, so it must be well grounded.

6. If the grounding is not good, the accumulation of static electricity to a certain extent may also cause sparks, which is easy to cause fire, which needs serious attention.

7. Poor grounding may also cause ink dots to split. If there are problems such as poor print quality, the printer must be grounded.

The seven key points about the use of cij printers are shared with you in detail here. I hope that when you perform corresponding operations, you need to analyze some specific points accordingly. When operating, you need to pay attention to some points that should be paid attention to to avoid some problems.

To that end, LEAD TECH Technology Co., Ltd. has successfully built a solid foundation and infrastructure for cij printer manufacturing.

Are you interested in buying ? We also have all kinds of in offer. Visit Leadtech Coding to know more and order, we have them at pocket friendly prices.

Looking for Manufacturers in China? Then LEAD TECH Technology Co., Ltd. is the right choice. we are a well known date coding machine cij printer Manufacturers and suppliers from China.

Individuals with varied technical skills use cij printer in a wide range of applications.

High-quality products are huge boosts when it comes to marketing ideas; allowing potential manufacturers to place themselves in the shoes of a satisfied customer brings them one step closer to understanding the idea of cij printer.