Kodlamada LeadTech yazıcı lider üreticisi & 2011'den bu yana Markalama Sektörü.
Weatherproof IPPC Marks for Rough, Export-Bound Timber
Wood & Lumber Coding & Marking
Substrates: Pallets · Plywood / Boards / Timber · Export Wood Packaging (IPPC/EPAL) · Furniture Components
√ Rechnology: Label Print & Apply (LPA)（Pallet GS1 / SSCC Labeling）· Continuous Inkjet (CIJ)（Direct Marking on Panels / Wood Materials）· CO₂ Laser（Permanent Panel Marking）· Hot Branding（Durable Outdoor Marking）
√ Recommended LT Model: LT800 (CIJ) · P7 Pro (PIJ) · LT60C CO₂ Laser
√ The One Constraint: Wood is heterogeneous — grain, knots, moisture, and rough saw texture make ink absorption inconsistent. Choose a technology that tolerates surface variation.
Wood and lumber marking supports grade identification, origin traceability, logistics management, and export compliance. In logistics and warehouse environments, automated label print & apply is the standard for pallet identification, while CIJ is standard for direct marking on plywood, boards, and timber. Two physical realities govern selection: wood surface heterogeneity (grain, knots, moisture, rough saw texture) causes inconsistent ink absorption, and export marks (IPPC/EPAL) are permanent identification requirements, not variable date codes.
| Substrate | Key Property | Coding Implication |
| Pallets | Logistics & warehouse | Automated Label Print & Apply supporting GS1/SSCC and WMS/ERP |
| Plywood / Boards / Timber | Construction wood | Direct marking via CIJ or CO₂ laser |
| Export Wood Packaging | Cross-border shipment | May require IPPC/EPAL permanent identification marks |
| Furniture Components | Grade & traceability | Grade and traceability identification |
Coding Challenges
- Wood surface is heterogeneous — grain, knots, moisture, rough saw texture → ink absorbs inconsistently → code density varies and legibility drops. Choose a technology that tolerates surface variation (CO₂ laser engraves; CIJ with large characters).
- Sawing and machining throw wood dust and debris → dust fouls printheads and optics → drifting print quality and more downtime. Enhanced protection (IP rating) and maintenance planning are required.
- Export wood packaging requires IPPC/EPAL permanent marks → a variable date-ink stamp is not a permanent identification mark → the shipment fails export compliance. Use permanent marking (laser or hot branding) for IPPC/EPAL.
- Marked wood is stored and shipped outdoors → weather abrades or washes a surface mark → the identification is lost in the field. Use durable, outdoor-capable marking (hot branding or laser engraving).
| Technology | Fit | Why / Why Not |
| Label Print & Apply (LPA) | ★ Recommended(Pallets) | The dominant standard for pallet identification — GS1/SSCC labels with WMS/ERP integration |
| Continuous Inkjet (CIJ) | ★ Recommended(Direct Marking on Panels / Wood Materials) | Standard for direct marking on plywood, boards, timber, and construction wood |
| CO₂ Laser | ★ Recommended(Permanent Panel Marking) | 10.6 μm laser cleanly engraves organic material with strong contrast; consumable-free |
| Hot Branding / Stamp Impression | ○ Alternative(Durable Outdoor Applications) | Mechanical/heat impression for durable, outdoor-capable marks on timber and traditional pallets |
| UV Laser | - Not recommended(Wood Materials) | The 355 nm cold-laser wavelength has no advantage on wood; CO₂ at 10.6 μm is the laser that cleanly engraves organic material |
Pallet identification → automated label print & apply, tied to GS1/SSCC and WMS/ERP. Direct marking on plywood, boards, timber → CIJ (large characters hold better); permanent board marks → CO₂ laser, which cleanly engraves organic material. Outdoor durability → hot branding. Do not use UV laser on wood — wrong wavelength, no advantage; CO₂ is the laser that engraves wood cleanly.
Typical Code Content
Applications
Recommended LT Solution
FAQ
